To order, click on the small circle button of the kit of your choice. Click on "ADD TO CART".

Light up the inside or background with one of the inexpensive white or warm yellow LED string light kits, with a remote and a concealable battery box. A drop of glue holds the very small lights in place along the gunwales. About 25', can be cut to length or doubled up. Great touch, only $20. 

Every  72" canoe kit includes:  a  sturdy multi-piece strong back, cut out of MDF,  13 large CNC cut 1/4" plywood forms, lettered to correspond with the slots on the strong back. A large bundle(around 30) of full length clear white pine strips with an assortment of shorter ones, 4 full length Cedar or Mahogany strips, depending on which wood kit you chose. 4  inner and outer toe rails, plus fancy fully woven seat caning material, seat frames,  two copper half round stem guards,  6 thin stem laminates, two breast hooks, 3 thwarts,  brads, paddle kit, step by step instruction manual and the " How to build the 72" DVD. Choose which  wood  you would like for the rails, seats, thwarts and breast hooks. The epoxy & cloth is recommended for this model making it  very rigid and durable.  16 ozs. of Krystal Klear epoxy an large piece of 3 oz cloth is only $55 when purchased with the kit.


           
INCLUDED with every Deluxe kit is:
-13 CNC cut 1/4" plywood forms with the centers cut out.
-A lettered stong back cut out of MDF material ( to prevent any warping) corresponding to the forms for easy set up.
- A large bundle of clear native white pine strips, for a very nice strip look.
-4 "dress"wood strips either (choice of wood)
-4 rounded toe rails  (choice of wood)
-2 sets of seat frames , 3 thwarts, 2 breast hooks or end decks, (choice of wood) and a prewoven cane seat material.
-3 piece wall mount for displaying the finished model
-Easy to read step by step instruction manual. (can be downloaded for studying)
-Attractive custom made packaging with colorful label , attractive gift.

- How to build the 72" wood strip canoe model kit" DVD
-Choice of either  Red Cedar or  pine ribbing material for that real ribbing look!
-2 copper half round stem guards
-6 stem laminates for that real stem look
-1 paddle kit

Large sturdy, 5 piece slide together mantel or desktop WAVE shaped stand. Can be stained or painted, a real eye catcher. CNC cut. $20 when added to order.

New large adjustable tabletop or wall mount stand for the 72" Kayak. A large place for the plaque wiht your name and model. Comes with barrel nut and bolt to securely tighten the brackets at any angle. We are very pleased with this new innovation. Very cool, slides together, sturdy and great looking. $30.00 when added to kit

The 72" Red Cedar kit arrived so quickly, and what a joy unpacking the parts. Pleased with quality. Can't wait to get started. Randy Clements, Whitewater,  WI

Dlx poplar pine rib $229.95 Dlx Red Cdr Red rib $239.95 Dlx Red Cdr pine rib $239.95 Dlx Mahg Rd Cdr rib $239.95 Dlx Mahog, pine rib $239.95
.
A

Your kit comes with one paddle kit but if you would like to have a second, add it here. Easy to assemble. 

 $12 each, sold with kit only.

Super glossy crystal clear 16 oz Epoxy  and 3 0z cloth kit. A  ratio of one to one. Much easier for small batches. Crystal clear and full gloss epoxy. We are very pleased with this.  more than enough to do outside and inside coat. Plus, it leaves a rich deep finish equal to many coats of varnish. Great for learning the technique and also makes the large model very strong, durable and long lasting. The kit includes 16 oz Epoxy resin with  hardener and a large piece of 3 oz. fiberglass cloth, full instructions, easy to use. Low odor $65 + 5  shp

The 72" E.M. White Guide wood strip canoe kit is really a big model! Pictures taken of it in the water are hard to tell if it is a model or the full size canoe!  The 72" is one of the E.M. White Guide canoe series, second to 96". All of the E.M. Guide series has gone through many changes and vast improvements over the years. Mainly the CNC cut forms, the use of the 4" sliding bar clamps to hold the strips in place while the glue dries, along with stem laminates and copper stem guards, real cane seat webbing, and more. The pine ribbing is as realistic as it gets and very easy and fun to work with. Soak the cut ribbing in hot water, then gently bend and form to the hull. Let dry and then glue in place. The Krystal Klear epoxy and cloth are 1 to 1 ratio making it almost fool proof to work with, and yielding outstanding gloss finish. The strong backs are now machined out of MDF material and stapled together, assuring that it stays true and accurate. The standard kit is the Red Cedar Deluxe which includes everything shown below. Epoxy & 3 oz cloth kit are sold separately. The kit does not come with a stand or wall mount, but there are several different ones to choose from below. We have been offering 72" wood strip canoe model for a long time and there's many pictures in the photo gallery. The 72" canoe model is a real beauty, which will make you feel like you're actually building the real thing!

There is a Chandelier kit which turns your model into a very beautiful functional over head light. Check out the video.  Email me for more information.


The 72" E.m. White Guide wood strip canoe. The Grand Daddy of  all the kit!

Now we have a kit which turns your 96", 72" or the 54" into a beautiful canoe chandelier. The 72" has 4 switchable 3 color LED flat panel lights that snap into a pine floor with cross members. Easy to assemble and finish. Some electrical tools is needed to wire the lights and cord together. Comes with wide & thin pine floor boards, 5 cross members cut to fit in the hull but some fitting will be required, brass screws , wire, 4 lights, electric cord.  245.00 + shp. Shipping will be figured less if it is combined with the 72" kit.


4 20 watt LED Flood lights, choose soft or warm white. Thees likes have worked well over the years. They are not dimmable and only in square. $145.00 +shp